Refurbishing Furniture with 3M DIY

Pin It
This post is a collaboration with 3M DIY. To keep up-to-date on projects, products and sampling visit 3MDIY.com. The content, project and opinions are 100% mine.
refurbishing furniture technique
I had a great opportunity to work with 3M DIY once again on this fun little project...well, fun once all the sanding was over and the dust settled and I could see the finished project :) Don't get me wrong, I love doing all the inbetween stuff to get to the finished project...but this time around, oh boy. There was tons and tons of sanding and dust and just grossness that I could have lived without.


This table was given to me a couple of years back and has been sitting in my basement ever since. It has been used as a project table top to do my jigsawing on; a place to throw random pieces of wood; a place to paint a few things; and most recently a place to put a broken chair and it's leg.:) I had great plans to paint this and put it somewhere, but didn't ever have a place to put it so it just sat there along with the multitude of other forgotten furniture pieces. One by one I will knock each of the pieces off my to-do list...I promise. lol. It may take me a few years, but it will get done. Now if I can only stop putting more and more pieces down there :)
refurbishing furniture with 3M DIY

Here are the supplies I used to restore this table:
Forceflex Flexible Safety Eyewear from 3M™ Safety Products
3M Tekk protection sanding and fiberglass valved respirator from 3M™ Safety Products
Sander
3M SandBlaster Sandpaper from 3M Advanced Abrasives
3M SandBlaster Sanding pad from 3M Advanced Abrasives
A lot of patience
Chalk Paint

When I received this table, it was already sanded on top so that was nice :) but the rest of it needed some attention. Plus, I wanted to sand a little more on top. I used 3M sandpaper to take off the stain. I wasn't sure about what to use when stripping the stain off so I ultimately decided on the 80 grit sandpaper, which I know strips paint off wonderfully. Worked like a charm :)
refurbishing furniture with 3M DIY

Next was to figure out how to get in the creveces of the legs. 3M also has a wonderful product meant especially for this task, the Sandblasting sanding pad. I took what I could off with the sander but then took off the rest of the stain on the legs with the sanding pad
refurbishing furniture with 3M DIY

It took me about a whole hour to strip all the stain off of this...and trust me, the dust was flying. The only way I survived was use the Tekk Protection eye wear and respirator mask. Tekk Protection eye wear and respirator mask. I took the glasses off for a second and completely regretting it. I think my eyes are still red from it.

I then wiped down the table to remove the settle dust and went to painting!
chalkpaint

I decided to paint this with some chalkpaint (which I'll talk more about in a later post). I wasn't sure about the color at first, but once I got it upstairs into my front room, I was in love. It's the perfect neutral color and not white :)
Refurbishing furniture

I'm so glad I finally got around to restoring and using this table! And I'm sure the hubs will be glad to know I got it out of the basement lol.

I'm thinking of redoing our guest bedroom/office again and think this table will be a perfect addition as the desk.
refurbishing furniture with chalkpaint

But I do like it in here a lot also...so I guess we'll see what really happens :)
Half moon table refinished with chalkpaint

See how perfect the color is against white? I'm so glad I ended up not painting it white; this is sooo perfect.
Urban Oasis Decor Chalk Paint

To check out some other great projects and how to use 3M's wonderful products visit the 3M DIY Twitter Page and the 3M DIY Facebook Page.

This post is a collaboration with 3M DIY. To keep up-to-date on projects, products and sampling visit 3MDIY.com.
Disclosure of Material Connection: This is a “sponsored post.” The company who sponsored it compensated me via a cash payment, gift, or something else of value to write it. Regardless, I only recommend products or services I use personally and believe will be good for my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CFR, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”

4 comments

  1. oh my god... This is amazing. It is a really good idea. Save money and it came out so beautiful. Bravo!!!!

    ReplyDelete

happy DIYing! Alicia